E-Line Technology Network Video Recorders Manuel d'utilisateur télécharger pdf (Page 87)

Configuration

Click to adjust the brightness

for the BNC monitor

Click inside CVBS Output Brightness to adjust the brightness of the BNC monitor.

5 Click A

pply to save changes. Right-click repeatedly to return to live view.

Changing the Device Name

The Device Name is the name of the system that appears in the System Information page.

You may create a custom Device Name of your choice.

To change the Device Name:

1 Right

-click and then click Menu.

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click Configur

ation>More Settings.

4 Under Devic

e Name, enter a name for your NVR. This can be anything of your choice (e.g.

home, office, etc.).

Enter a name for your NVR

5 Click Apply to save changes. Right-click repeatedly to return to live view.

Network

Selecting Fixed IP or DHCP

The system is capable of operating in DHCP or fixed IP address modes.

To setup a fixed IP address or DHCP:

1 Right-click and then click Menu.

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click Configur

ation>Network.

4 Check Enab

le DHCP to have the system automatically obtain an IP address from the router.

Un-check Enable DHCP to assign a fixed IP address.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 194 195

Pas de commentaire

E-Line Technology Network Video Recorders Manuel d'utilisateur Page 87