E-Line Technology Network Video Recorders Manuel d'utilisateur télécharger pdf (Page 65)

HDD

Advanced

Configuring Recording Group Settings

Use recording group settings if you want to specify which hard drive group your cameras

will record to.

NOTE: You must have a second hard drive (not included) installed to use recording group

sett

ings.

To configure recording group settings:

1 Right-click and then click Menu

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click HDD>Adv

anced.

4 Under Reco

rd on HDD Group, select the hard drive group you would like to configure.

Select hard drive group

Select cameras to record to

selected group

NOTE: To assign your hard drives to groups, see “Configuring Hard Drive Type or Group” on

page 45.

5 Check the c

ameras you would like to record to the selected hard drive group.

6 Click A

pply to save changes. Right-click repeatedly to return to live view.

HDD Detect

NOTE: The options in the HDD Detect sub-menu are for advanced users. It is recommended to

leave all settings on their default values.

Setting S.M.A.R.T. Settings and Running S.M.A.R.T. Checks on the Hard Drive

The device supports S.M.A.R.T. and Bad Sector Detection. S.M.A.R.T. (Self-Monitoring,

Analysis and Reporting Technology) is a monitoring system for hard drives that detects and

reports potential reliability issues to help anticipate hard drive failure.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 194 195

Pas de commentaire

E-Line Technology Network Video Recorders Manuel d'utilisateur Page 65