E-Line Technology Network Video Recorders Manuel d'utilisateur télécharger pdf (Page 76)

Camera

Image

Configuring Camera Image Settings

1 Right-click and then click Menu.

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click Came

ra>Image.

4 Under Camera, sel

ect the camera you would like to adjust.

5 Use the slider

s to adjust the Brightness, Contrast, Saturation, and Hue. Note that it may take

a couple seconds for changes to occur.

Select camera

Adjust image settings

6 Click Apply to save changes.

Motion

Configuring Motion Detection Settings

By default, motion detection is enabled on all connected cameras. You can enable/disable

cameras for motion detection.

You can also enable/disable parts of the image for motion detection. For example, you can

disable motion detection where your camer

a overlooks a public street but enable motion

detection to trigger when someone enters your driveway.

To configure motion detection settings:

1 Right

-click and click Menu.

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click Came

ra>Motion.

4 Under Camera, sel

ect the camera you would like to configure.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 194 195

Pas de commentaire

E-Line Technology Network Video Recorders Manuel d'utilisateur Page 76